Inspection of a leaking commercial roof before repair specification

Flat and metal roof repair · North West

Commercial Roof Repair

Commercial flat and metal roof repair across the North West, coordinated from Blackburn. Forti Nova helps assess defects, specify compatible repairs and supply systems, with approved-contractor delivery where required.

01Condition first
02System compatibility
03Approved delivery

Direct answer

Commercial roof repair is targeted work intended to restore weather resistance where the wider roof remains serviceable. It may include membrane repairs, lap and fixing work, flashing repairs, drainage corrections, corrosion treatment or localised coating. Repeated or widespread defects may indicate refurbishment or replacement instead.

Repair scope

Flat roofs, metal sheets and drainage.

The repair method follows the defect and the condition of the surrounding roof.

Membrane seams and details

Open seams, splits and failed upstands may be repairable where the surrounding membrane and deck remain sound. The existing system must be identified before compatible repair materials are selected.

Roof leak repair

Metal laps and fixings

Loose fixings, failed washers and moving overlaps need checking together. Local fixing or lap work may be suitable; weakened or perforated sheets can require renewal.

Metal roof repair

Flashings and penetrations

Rooflights, wall junctions, pipe collars and vents can admit water where adjoining details separate. Movement and support need checking before the affected junction is repaired.

Trace the leak

Gutters and outlets

Water may enter through gutter joints, corroded sections or failed outlets. Repair needs to address drainage as well as waterproofing; a lining does not correct inadequate falls or capacity.

Commercial gutter repair

Local corrosion

Corrosion at sheet edges and fixings needs checking for loss of metal. Preparation and protective treatment require a serviceable substrate; serious deterioration calls for a wider repair scope.

Cut-edge corrosion

What changes the quotation?

Access, roof height, defect extent, preparation, substrate repairs, drainage details and restrictions inside the building affect the quotation. Hidden defects may need investigation before the scope can be confirmed.

North West coverage from Blackburn.

Forti Nova is based in Blackburn and covers suitable commercial repair enquiries across the North West. Send the site postcode so coverage and the proposed work can be confirmed.

Water coming into the building?

Call to discuss the site and current problem. Send the postcode, roof type, where the leak appears and photographs taken from a safe position. Note any effect on stock, equipment or occupied areas.

Before we recommend work

Inspect the roof before choosing a product.

The defect, roof condition and building use determine the work required. We do not choose a product before understanding the building.

Trace the defect

Check how water is entering, whether it is travelling within the build-up and whether the visible leak is remote from the roof defect.

Confirm compatibility

Identify the existing membrane, coating, metal finish or detail so the proposed repair does not create an adhesion or movement conflict.

Choose the right level of work

Separate a local repair from wider deterioration that would be better handled through refurbishment or replacement.

When this route fits.

  • 01The defect is localised and the surrounding roof remains serviceable.
  • 02The substrate can be prepared and a compatible repair detail is available.
  • 03Drainage, movement and moisture conditions can be addressed within the repair scope.

When it does not.

  • 01The roof build-up is saturated across a wide area.
  • 02Structural decking or sheets have lost serviceable integrity.
  • 03Repeated repairs are failing because the underlying system has reached the end of its useful service life.

How we deliver the work

From survey to installation.

Forti Nova supplies roofing systems, provides technical support and appoints approved contractors where installation is required. What we provide depends on the job.

01

Receive building, roof and leak information.

02

Assess condition and likely causes.

03

Define repair, refurbishment or replacement route.

04

Supply the system and appoint an approved contractor where required.

Related services

Related services.

Start with the problem, inspect the roof and then agree the repair or refurbishment system.

Commercial coverage

Roofing contractors across the North West.

Clear answers

Frequently asked questions

Can a commercial flat roof be repaired without replacing it?
Yes, where the defect is local and the surrounding membrane, deck and insulation are suitable to remain. Widespread moisture, unstable decking or repeated failures can make refurbishment or replacement more appropriate.
Can you repair a leaking metal roof?
Potentially. Sheet condition, laps, fixings, washers and flashings need checking together. Local repair may suit sound metal; perforation or extensive corrosion can require sheet replacement or broader refurbishment.
Can repair work be planned around an occupied building?
That depends on access, internal risk and business operations. Tell us about staff, stock, equipment and working-hour restrictions so these constraints can be considered when the repair scope is agreed.
Can you price a repair from photographs alone?
Photographs help identify likely work, but cannot confirm hidden moisture, deck condition or every defect. The quotation depends on access, preparation, repair extent and any investigation needed.

Your roof. Your next step.

Show us the roof

Send the building location, photographs and what is happening. We will help define the most useful next step.